The Slideacorpse is a simple pneumatic prop that is designed to horizontally move a corpse or skeleton type prop towards your customers. Normal applications would be a humanoid character attacking from inside a barrel or large drainage pipe, or from under a bed. Moving a giant attacking alligator would be great also! Included is the metal framework, pneumatic cylinder, solenoid valve and regulator. All you have to do is hook up an air supply and a power source. This prop in particular uses a linear bearing and cable cylinder which will gurantee hundreds of thousands of operations with a load of several hundred pounds located on the bearing plate. The standard model travels 36″, but we can customize a shorter or much longer version as a custom prop with no problems. There would be an additional fee for longer versions. The air inlet on the valve is a 1/4″ push to connect fitting for tubing. If you need to hook this prop up using a standard compressor fitting, let us know, and we can swap it out for you, or you can just buy one of our adapters. The solenoid valve is 12vdc. This allows you to use a variety of sensor and controller options. If you need help picking a controller or sensor for your prop, please let us know and we can help. All our props are built using a combination of fully hardened shoulder bolts, bushings, thrust bearings, pillow block bearings, and linear bearings. Our props are built to last. We can also add any of our static props to your mechanism, just ask!